高速列车隧道压力波模拟系统仿真控制研究

高速列车在隧道中运行、交会时,车体表面将形成复杂的膨胀波和压缩波,引起车体变形,影响行车安全。车外压力波通过车体传入车内引起车内空气压力的波动,影响乘车舒适度。使用实测的隧道压力波为期望波形,采用AMESIM与Matlab构建联合仿真的模式来设计高速列车隧道压力波模拟控制系统。针对模拟系统大容量、大滞后及强非线性特点,采用迭代学习控制算法来实现隧道压力波的重建。仿真验证表明:迭代学习控制算法的控制误差比常规算法小,控制效果较理想。     

最高功放效率PAPR抑制评估标准和迭代准则

高峰均功率比一直是掣肘OFDM系统性能的最大障碍。为了更精确地评估峰均比抑制对功放失真的影响,提出了最优CCDF(OCCDF)迭代收敛准则。新准则考虑放大器中每个子载波的失真,限定MER条件下得到尽可能低的放大器输入功率回退(IBO),获得最高功放效率所匹配的OFDM整体信号分布。基于此,在CMMB系统中给出了一种高效的时域削波结合星座图扩展(ACE)的峰均比抑制技术。采用OCCDF迭代峰均比抑制方案实验结果:MER=40 dB条件下,基于ACE峰均比抑制的OFDM系统相比抑制前获得了3.05 dB的功放IBO性能改善。对应到功率放大器的性能改善:功放效率提升了15.74%,总功耗和管耗分别降低了22.2%和40.19%。     

LDPC码译码算法及性能分析

为了进一步降低低密度奇偶校验(LDPC)码译码算法的复杂度,基于经典置信传播(BP)译码算法,给出了对数域迭代后验概率对数似然比(APP LLR)算法。通过概率域的和积算法(SPA)和对数域的迭代APP LLR算法的性能仿真及分析可见,迭代APP LLR算法能以较小的性能损失换取复杂度的大幅降低。进一步选用迭代APP LLR算法,结合不同地形条件下的VHF频段信道模型,仿真了LDPC码编译码系统的性能。理论分析及仿真结果均表明,基于迭代APP LLR算法的LDPC码,实现简单,性能优异,具有良好的工程应用前景。     

基于振铃抑制的多视频超分辨率重建

为了利用较少低分辨率视频序列实现多视频超分辨率重建,本文提出一种将时空分别进行重建的算法。首先利用已有方法进行时间重建,再以得到的高时间分辨率的视频序列帧为参考帧,结合输入低分辨率视频序列帧进行空间重建。此外,针对传统重建方法在配准不精确的情况下会产生振铃现象这一问题,提出一种加入自适应惩罚项的改进迭代反投影(IBP)算法。实验结果表明,本文算法在输入低分辨率序列较少的情况下,能较好地实现多视频超分辨率重建,且能有效抑制振铃现象;重建出的高分辨率视频序列的结构相似度较对比算法提高3.4%~6.1%;在主观感受上,图像边缘锐利、人工效应少。     

Performance and robustness of block constraint preconditioners in finite element coupled consolidation problems

Block constraint preconditioners are a most recent development for the iterative solution to large‐scale, often ill‐conditioned, coupled consolidation problems. A major limitation to their practical use, however, is the somewhat difficult selection of a number of user‐defined parameters (at least 4) in a more or less optimal way. The present paper investigates the robustness of three variants of the block constraint preconditioning in relation to the above parameters. A theoretical analysis of the eigenspectrum of the preconditioned matrix provides relatively simple bounds of the eigenvalues as a function of these parameters. A number of test problems used to validate the theoretical results show that both the mixed constraint preconditioner (MCP) combined with the symmetric quasi‐minimal residual (SQMR) solver and the MCP triangular variant (T‐MCP) combined with the bi‐conjugate gradient stabilized (Bi‐CGSTAB) are efficient and robust tools for the solution to difficult Finite Element‐discretized coupled consolidation problems. Moreover, the practical selection of the user‐defined parameters is relatively easy as a stable behavior is observed for a wide range of fill‐in degree values. The theoretical bounds on the eigenspectrum of the preconditioned matrix may help to suggest the most appropriate parameter combination. Copyright © 2009 John Wiley & Sons, Ltd.     

A generalised optimal linear quadratic tracker with universal applications – part 1: continuous-time systems

This paper presents a generalised optimal linear quadratic analog tracker (LQAT) with universal applications for the continuous-time (CT) systems. This includes: (1) a generalised optimal LQAT design for the system with the pre-specified trajectories of the output and the control input and additionally with both the input-to-output direct-feedthrough term and known/estimated system disturbances or extra input/output signals; (2) a new optimal filter-shaped proportional plus integral state-feedback LQAT design for non-square non-minimum phase CT systems to achieve a minimum phase-like tracking performance; (3) a new approach for computing the control zeros of the given non-square CT system; and (4) a one-learning-epoch input-constrained iterative learning LQAT design for the repetitive CT system.     

Iterative algorithm for optimal fiducials under weak perspective projection

In previous work, we designed space fiducials with the aim of making camera pose determination as noise‐insensitive as possible. These fiducials turned out to be sets of points that formed concentric regular polyhedra. Here, we apply an idea of Dementhon and Davis and test and analyze an iterative linear algorithm in conjunction with our optimal fiducials to increase the accuracy of the computed camera pose. We also analyze under what circumstances this iterative algorithm is guaranteed to converge to the correct solution. Comprehensive computer simulations illustrate the behavior of the algorithm and the degree of improvement in pose determination in case of convergence. © 2009 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 19, 27–36, 2009     

Spectral power distributions for the CIE stimuli

The CIE reference colour stimuli, X, Y, and Z, were derived by constructing a triangle outside the R,G,B triangle and outside the area bounded by the spectrum locus and the purple line. By this means, all colours, including monochromatic ones, have positive tristimulus values. The colour‐matching functions are the relative quantities of these stimuli required to be mixed additively to match the equal energy monochromatic colours. The stimuli are not realizable as light sources, and the CIE has not specified their spectral power distributions. There is an infinite number of spectral power distributions whose properties meet the prerequisites for X (X = 100, Y = 0, Z = 0), Y (0, 100, 0), and Z (0, 0, 100), and two possible sets have been calculated by different methods. These curves could be used as primary red, green, and blue lights in additive mixing to produce synthetic reflectance curves, which are useful in the specification of on‐screen colours, and as a means of producing colour constant standards. © 2001 John Wiley & Sons, Inc. Col Res Appl, 26, 478–482, 2001     

Projection data replenishment algorithm for limited angle tomography

A new iterative algorithm of tomographic reconstruction of objects on the basis of projection data available in a limited range of angles only is proposed. The algorithm is based on calculating artificial projections in those directions where projection data are unavailable. By means of numerical simulations, it is verified that the algorithm developed ensured high quality of reconstruction up to the angular interval of 45–60°.